Summary
Kingston HyperX 4GB (1x4GB) Memory Module 1866MGz DDR3 Non-ECC CL9 240-pin Unbuffered DIMM
Features
JEDEC standard 1.5V (1.425V ~ 1.575V) Power SupplyVDDQ = 1.5V (1.425V ~ 1.575V)667MHz fCK for 1333Mb/sec/pin8 independent internal bankProgrammable CAS Latency: 9, 8, 7, 6Programmable Additive Latency: 0, CL - 2, or CL - 1 clockProgrammable CAS Write Latency(CWL) = 7 (DDR3-1333)8-bit pre-fetchBurst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]Bi-directional Differential Data StrobeInternal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)On Die Termination using ODT pinAverage Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°CAsynchronous ResetPCB : Height 1.180\' (30.00mm), double sided componentSpecifications
-
Memory
Memory Size-4096 MB\r ( 1 module(s)\r x 4096 MB\r)
Memory Type-DDR3
Memory Speed-1866 MHz
Memory Package-DIMM
Pin Configuration-240 pins
Bus I/O Configuration-Unbuffered
Error Correction-Non ECC
CAS Latency-CL9
Connector Material-Gold
Module Configuration-512M x 64
-
Electrical
Voltage-1.65 V
-
Environmental
Operating Temperature-0 to 85 °C
Non Operating Temperature--55 to +100 °C
-
Physical
Form Factor-240-Pin DIMM Module
Dimensions-(W) x (D) x (H)
Warranty
Unless otherwise stated it the product description, products come with a minimum 1 year RTB* warranty.
Certain products have an increased warranty period please contact us if you wish to confirm warranty terms/duration.
*Warranty terms for certain products may require you to return your item directly to the manufacturer/supplier.