Summary
ValueRAM\'s 256M x 72-bit (2GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), registered w/ parity, Intel Compatibility Tested, 1Rx8 ECC memory module, based on nine 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3- 1333 timing of 9-9-9. This 240-pin DIMM uses gold contact fingers.
Features
JEDEC standard 1.5V (1.425V ~ 1.575V) Power SupplyVDDQ = 1.5V (1.425V ~ 1.575V)667MHz fCK for 1333Mb/sec/pin8 independent internal bankProgrammable CAS Latency: 9, 8, 7, 6Programmable Additive Latency: 0, CL - 2, or CL - 1 clockProgrammable CAS Write Latency(CWL) = 7 (DDR3-1333)8-bit pre-fetchBurst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]Bi-directional Differential Data StrobeInternal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)On Die Termination using ODT pinOn-DIMM thermal sensor (Grade B)Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Asynchronous ResetPCB : Height 1.180 inch (30.00mm), double sided componentSpecifications
-
Memory
Memory Size-2048 MB\r ( 1 module(s)\r x 2048 MB\r)
Memory Type-DDR3
Memory Speed-1333 MHz
Memory Package-DIMM
Pin Configuration-240 pins
Bus I/O Configuration-Registered
Error Correction-ECC
CAS Latency-CL9
Connector Material-Gold
Module Configuration-256M x 72
-
Electrical
Voltage-1.5 V
-
Environmental
Operating Temperature-0 to 85 °C
Non Operating Temperature--55 to +100 °C
-
Physical
Form Factor-Memory Module
Dimensions-(W) x (D) x (H)
Warranty
Unless otherwise stated it the product description, products come with a minimum 1 year RTB* warranty.
Certain products have an increased warranty period please contact us if you wish to confirm warranty terms/duration.
*Warranty terms for certain products may require you to return your item directly to the manufacturer/supplier.