D-Link DWL-P50 Power Over Ethernet (PoE) Adaptor

Summary

The DWL-P50 Power over Ethernet Adaptor is a single-port injector that provides DC power for a non-P-equipped device, such as a surveillance camera or a wireless access point. It is designed to operate with LAN switches and other equipment that support industry-standard 802.3af Power over Ethernet (P) to deliver operation power to the networked device, allowing you to install the device at places such as on a rooftop or near a ceiling, where power is not easily accessible. The DWL-P50 supports both 5VDC and 12VDC power and can be flexibly deployed with network devices with different power voltage requirements. The DWL-P50 is useful for installation at a factory or TM Wi-Fi hot spot. This compact Adaptor allows you to install your surveillance cameras and wireless LAN devices on a building rooftop, on or near a ceiling for maximum coverage. Your cameras or wireless access points can be placed up to 100 metres away from a power source. It is at these places that wall AC outlets are inaccessible and providing power to these locations is difficult and expensive. The DWL-P50 is also handy for installation at offices with Internet telephones connected to a P Ethernet switch. It eliminates the need to individually power each IP phone. By transmitting remote power through the standard network cabling, the DWL-P50 ds away with the need for an AC outlet at each device location. Only a single Ethernet cable is run to each device instead of separate power and data cables.

Description

On a standard 4-wire UTP Category 5 cable, only two pairs (pins 1, 2, 3 and 6) are used for Ethernet data transfer. At one end, your P Ethernet switch inserts DC voltage into the unused wires, taking advantage of the unused pair of the network cable wires. At the other end, the DWL-P50 taps the DC power from the Ethernet cable for use by the non-P device. Consequently, a single Category 5 cable can now carry both Ethernet data and DC power. The idea is to supply the remote end with power and Ethernet connectivity via a single network cable. In addition to eliminating the need for additional, separate wiring for power, the DWL-P50 is also a useful tool that forms part of your centralized power network installation. A central UPS can be added to the P switch, to which all your wireless access points, surveillance cameras and Internet phones are connected. This installation provides uninterrupted power without the need to deploy a separate UPS for each device. The DWL-P50 is very small in size and lightweight and requires no configuration setting. It is designed for quick and easy deployment, and can be hooked with a simple plug to a network device placed on a high wall or ceiling. This P Adaptor supports both 5V and 12V DC output, allowing you to deploy it with a variety of devices with different power requirements. A built-in slide switch allows you select the required power output.

Features

Specifications

• Electrical

Power Adaptor Type-Power over Ethernet
Input voltage-48 VDC
Output Voltage-5/12 VDC
Cable length-100 m

• Environmental

Environmental-Operating Temperature - Humidity

• Physical

Form Factor-Power over Ethernet Adaptor
In The Box-DWL-P50 P adaptor • Quick Installation Guide • Ethernet cable • DC power cable with female power connectors
Dimensions-5.2 cm\r(W) x 8.09 cm\r(D) x 2.8 cm\r(H) - Weight 0.08 kg

• Shipping

Shipping Pallet Dimensions-(W) x (D) x (H) - Weight
Shipping Carton-containing a total of
Shipping Carton Dimensions-(W) x (D) x (H) - Weight
Trade Carton-containing a total of
Trade Carton Dimensions-(W) x (D) x (H) - Weight
Shipping Pallet-containing a total of

Warranty

Unless otherwise stated it the product description, products come with a minimum 1 year RTB* warranty. Certain products have an increased warranty period please contact us if you wish to confirm warranty terms/duration.

*Warranty terms for certain products may require you to return your item directly to the manufacturer/supplier.